Description

Vigor 2927 Router series

Key Specifications

• Gigabit Dual-WAN Ethernet WAN Router with Load Balancing & Failover
• Up to 950Mbps Throughput per WAN interface, 1800Mbps in total
• Up to 300Mbps IPsec VPN Throughput
• 50 LAN-to-LAN & Remote Teleworker VPN Tunnels
• 25 DrayTek SSL VPN Tunnels
• 5+1 Gigabit RJ-45 LAN Ports
• 4G/LTE with dual-SIMs for second backup telco (‘L’ models)
• AC1300 – 11ac ‘Wave 2’ Dual Band Wireless (‘ac’ models)
• 8 LAN Subnets with VLANs (Port-based / 802.1q)
• SPI Firewall and Content Filtering
• Optional VigorCare Available
• Can be centrally Managed by VigorACS

The Vigor 2927 series comes in several different models depending on the features required. Please double check when ordering that you have selected the correct product and a product intended for the correct region/network.

The EAN is a barcode number which identifies the unique specific product type. It is separate to the product serial number which is unique to each product. The EAN will also appear on your product box when you receive it so you can double check that you have been sent the right product.

These product codes are for UK/Irish products only. Please check with your local DrayTek office for the correct part nos. for your region if you are not in the UK/IE to ensure that you get the correct hardware and local support/warranty.

Technical Specification (UK Hardware Spec.)

Physical Interfaces

• WAN Ports: 1x Gigabit Ethernet (1G/100M/10M), RJ-45
• WAN/LAN Switchable Ports: 1x Gigabit Ethernet (1G/100M/10M), RJ-45
• LAN Ports: 5x Gigabit Ethernet (1G/100M/10M), RJ-45
• 2x Removable Wireless antennas (wireless ‘ac’ models)
• 2x Removable 4G/LTE Wireless antennas (‘L’ models)
• 2x USB 2.0 Ports for 3G/4G Modem, thermometer or Printer
  or 1x USB 2.0 Port (‘L’ models)
• Wireless On / Off / WPS button
• Recessed Factory Reset button

Performance

• NAT Performance:
  • 950 Mb/s NAT Throughput for Single WAN with Hardware Acceleration
  • 1.8Gb/s Total NAT Throughput for Dual WAN with Hardware Acceleration
  • 800 Mb/s NAT Throughput per WAN
  • 60,000 NAT Sessions
  • 8000 Hardware Accelerated NAT Sessions
• VPN Performance:
  • 300 Mb/s IPsec (AES256) VPN Performance
  • 800 Mb/s Hardware Accelerated IPsec VPN Performance – New! (requires f/w 4.2.1)
  • 120 Mb/s SSL VPN Performance
  • Max. 50 Concurrent VPN Tunnels
  • Max. 25 Concurrent SSL VPN / OpenVPN Tunnels

WAN Interfaces

• WAN1: Gigabit Ethernet
• WAN2: Gigabit Ethernet
• WAN3: 2.4GHz Wireless WAN (‘ac’ models)
• WAN4: 5GHz Wireless WAN (‘ac’ models)
• WAN5: 4G/LTE USB Modem (not included)
  or Integrated 4G/LTE Category 6 Modem (‘L’ models only)
• WAN6: 4G/LTE USB Modem (not included)

Internet Connection

• Load Balancing: IP-based, Session-based
• Hardware Acceleration
• 802.1p/q Multi-VLAN Tagging
• Multi-VLAN/PVC
• 2.4GHz & 5GHz Simultaneous Wireless WAN (with ‘ac’ models)
• WAN Active on Demand:  Link Failure, Traffic Threshold
• Connection Detection: PPP, ARP Detect, Ping Detect
• WAN Data Budget
• Dynamic DNS
• DrayDDNS – with automated LetsEncrypt Certificates
• Full Feature-set Hardware Acceleration (requires f/w 4.2.1):
  • Hardware Accelerated Quality of Service
  • Multi-WAN Data Budget
  • Traffic Graph & Data Flow Monitor
  • Bandwidth Limit
• IPv4 Connection Types:  PPPoE, DHCP, Static IP, PPTP/L2TP
• IPv6 Connection Types:
  • Ethernet: PPP, DHCPv6, Static IPv6, TSPC, AICCU, 6rd, 6in4 Static Tunnel
  • 4G/LTE Modem & USB 4G/LTE Modem: TSPC, AICCU

Integrated 4G LTE Modem Features (‘L’ models)

• Dual-SIM Failover
• 4G LTE Category 6 Modem with fallback to 3G / GPRS
• Unlocked to any network (BT, EE, 3, O2, Vodafone, Eircom)
• 4G LTE Max Data Rates:
  • 300Mbps Downlink (Category 6)
  • 50Mbps Uplink (Category 6)
• 4G LTE (FDD) Bands: 1, 3, 5, 7, 8, 20, 28, 32
• 4G LTE (TDD) Bands: 38, 40, 41
• 3G (WCDMA/HSPA+/UMTS) Bands: 1, 3, 5, 8
• 2x LTE Antennas included with 1m extension cables
• Per-SIM-Card WAN Data Budget
• 2x Standard-Size SIM-Card Slots
• Removable SIM slot cover
• SMS Inbox – Send & Receive SMS text messages
• SMS Router Commands – Status Report, Reboot via text message
• LTE Bridge Mode – New!

Wireless Features (‘ac’ models)

• AC1300 – 11ac ‘Wave 2’ Dual Band Wireless (‘ac’ models):

  • 802.11ac 2×2 wireless access point
  • Compatible with 802.11a/b/g/n wireless
  • Dual-band (2.4/5Ghz) simultaneous wireless
  • Up to 866Mbps PHY rate at 80MHz with 5GHz
  • Up to 400Mbps PHY rate at 40MHz with 2.4GHz (256-QAM)
  • Channel Bandwidth: 20/40MHz for 2.4GHz, 20/40/80MHz for 5GHz
  • MU-MIMO
  • Tx Beamforming
• Mesh Root support with DrayTek VigorAP Mesh Nodes – New! (requires f/w 4.3.0, available in Q4 2020)
• Up to 4 SSIDs per radio band
• Extended 5Ghz Band – Channels 36-48, 52-64, 100-140
• Wireless Optimisation: Airtime Fairness, AP-Assisted Mobility, Band Steering
• Bandwidth Management (Per Station / Per SSID)
• WMM (Wireless MultiMedia)
• WPS – WiFi Protected Setup
• Station Control – Time limited wireless connectivity per Station (e.g. 1 hour)
• EAPOL Key Retry – Disable EAPOL Key Retry to protect unpatched WLAN clients from KRACK
• Wireless Security:
  • WPA2
  • WPA3 – New! (requires f/w 4.2.2)
  • Pre-Shared Key authentication
  • Enterprise 802.1x authentication
  • WEP/WPA for Legacy Clients
  • Access Control – Blacklist / Whitelist client MAC addresses per SSID

Firewall & Content Filtering

• IP-based or User-based Firewall Policy
• User-based Time Quota
• DoS Attack Defence
• Spoofing Defence
• Content Filtering:
  • Application Content Filter
  • URL Content Filter
  • DNS Keyword Filter
  • Web Features
  • Web Category Filter (requires GlobalView subscription)

NAT Features

• NAT Port Redirection
• Open Ports
• Port Triggering
• DMZ Host
• UPnP
• ALG (Application Layer Gateway):  SIP, RTSP, FTP, H.323
• VPN Pass-Through:  PPTP, L2TP, IPsec

LAN Management

• 802.1q Tag-based, Port-based VLAN
• Up to 8 LAN Subnets (NAT or Routing mode selectable per LAN interface)
• Up to 16 VLANs
• DMZ Port
• DHCP Server:
  • Multiple IP Subnet
  • Custom DHCP Options
  • Bind-IP-to-MAC
  • DHCP Pool Count up to 1022 addresses for LANs 1-3
  • DHCP Pool Count up to 253 addresses for LANs 4-8
  • DHCP Relay per LAN
• LAN IP Alias
• Wired 802.1x Port Authentication
• Port Mirroring
• Local DNS Server
• Conditional DNS Forwarding
• Hotspot Web Portal
• Hotspot Authentication: Click-Through, Social Login, SMS PIN, Voucher PIN, RADIUS, External Portal Server

Networking Features

• Policy-based Routing: Protocol, IP Address, Port, Domain/Hostname, Country
• High Availability: Active-Standby, Hot-Standby
• DNS Security (DNSSEC)
• Local RADIUS server
• SMB File Sharing (Requires external storage)
• Multicast: IGMP Proxy, IGMP Snooping & Fast Leave, Bonjour
• Routing Features: IPv4 & IPv6 Static Routing, Inter-VLAN Routing, RIP v1/v2/ng, BGP

VPN

• Up to 50 active VPN tunnels – including up to 25 SSL VPN or OpenVPN Tunnels
• Up to 16 Hardware Accelerated 800Mb/s IPsec tunnels – New! (requires f/w 4.2.1)
• LAN-to-LAN – Dial-In VPN Server & Dial-Out VPN Client
• Teleworker-to-LAN – Dial-In VPN Server
• User Authentication: Local, RADIUS, LDAP, TACACS+, mOTP
• IKE Authentication: Pre-Shared Key and Digital Signature (X.509)
• Encryption: MPPE, DES, 3DES, AES (128/192/256)
• Authentication: SHA-256, SHA-1
• VPN Trunk (Redundancy): Load Balancing, Failover
• Dead Peer Detection (DPD)
• IPsec NAT-Traversal (NAT-T)
• Virtual IP Mapping – Resolve VPN IP subnet/range conflicts
• DHCP over IPsec
• DrayTek VPN Matcher – Connect to a VPN router that’s behind NAT/CG-NAT – New!
• VPN Protocols:
  • IPsec IKEv1, IKEv2, IKEv2 EAP
  • IPsec-XAuth
  • DrayTek SSL VPN
  • OpenVPN (Remote Dial-In User only)
  • GRE over IPsec
  • PPTP
  • L2TP, L2TP over IPsec

Bandwidth Management

• IP-based Bandwidth Limit
• IP-based Session Limit
• User-based Data Quota

Quality of Service (QoS)

• Classify via TOS, DSCP, 802.1p, IP Address, Service Type
• 4 Priority Queues
• App QoS
• VoIP Prioritization
• Class-based Outbound Traffic Tagging: DSCP & IP Precedence

Management

• Local Service: HTTP, HTTPS, Telnet, SSH, FTP, TR-069
• Config File Export & Import
• Import Config from Vigor 2926
• Auto Backup Config to USB Storage – New!
• Firmware Upgrade via TFTP, HTTP, TR-069
• 2-Level Administration Privilege
• Access Control Features: Access List, Brute Force Protection
• Syslog
• SMS, E-mail Notification Alert
• SNMP: v1, v2c, v3
• Managed by VigorACS

Router Central Management Features

• AP Management: Up to 20 VigorAP access points
• Switch Management: Up to 10 VigorSwitch network switches
• VPN Management: Up to 8 Vigor routers
• DrayTek Mesh: Up to 7 VigorAP access points – New! (requires f/w 4.3.0, available in Q4 2020)

Operating Requirements

• Rack Mountable (Optional Vigor RM1 mounting bracket required)
• Wall Mountable
• Temperature Operating: 0 °C ~ 45 °C
• Storage: -25 °C ~ 70 °C
• Humidity 10% ~ 90% (non-condensing)
• Power Consumption:
• Operating Power: DC 12V (via external PSU, supplied)
• Warranty
  • Two (2) Year Manufacturer’s RTB
  • Optional VigorCare Enhanced Warranty Available
    • VigorCare B3 3 Year Subscription: VCARE-B3
    • VigorCare B5 5 Year Subscription: VCARE-B5

• Power Requirements : 220-240VAC
• Dimensions:
  • 241mm Width
  • 165mm Depth
  • 44mm Height

Box Contents

• Vigor 2927 series router
• Quick Start Guide
• Screws & wall plugs for wall mounting
• 2m Cat-5e RJ-45 Network Cable
• 2x Detachable Wireless LAN Antennas (‘ac’ models)
• 2x Detachable LTE Antennas (‘L’ models)
• 2x 1m LTE Extension Base (‘L’ models)
• DC 12V Power Supply with UK Plu